Each DALI device behind a DALI gateway has a Server Item "Name" which shows the human-readable name of the DALI device. As default, this name has the form "Device<number>" i.e. Device1, Device2, ... This name is also used within the reports. The default name can be changed within the Device Name Mapping Definitions Table:
| parameter | type | optional/mandatory | description | default |
|---|
| Gateway name | string | M | Name of the |
| DALI gateway |
| as used within the gateway definition. |
| Gateway path | string | O | Path of the Dali gateway |
| as used within the gateway definition. |
| empty |
| Device id | number | M |
| DALI |
| short address of the device (starting with 1). |
| Display name | string | M | Name that shall be used instead of the default name. | |
| Following parameters are available from LaMPS version 4.1.11 on: | ||||
| Serial | string | O | empty | |
| Location | string | O | empty | |
| Device type | enum | O | possible values:
| empty |
| UPS name | string | O | UPS name as specified in TODO UPS definitions | empty |
| UPS path | string | O | UPS path as specified in TODO UPS definitions | empty |
| On Off | ItemID | O | Switch item for the given DALI device. | empty |
| On Off Status | ItemID | O | Switch status item for the given DALI device. | empty |
| Brightness | ItemID | O | Brightness set item for the given DALI device. | empty |
| Brightness Status | ItemID | O | Brightness status item for the given DALI device. | empty |
| Operating Hours | ItemID | O | Operating hours counter item (read-only, numeric) of the given DALI device. | empty |
| Operating Hours Reset | ItemID | O | Operating hours counter reset item (write-only, boolean) of the given DALI device. | empty |
| Operating Hours Alarm | ItemID | O | Operating hours counter alarm item (read-only, boolean) of the given DALI device. | empty |
| Operating Hours Alarm Threshold | ItemID | O | Operating hours counter alarm threshold item (read-write, numeric) of the given DALI device. | empty |