| Table of Contents |
|---|
...
Vendor | Name | Order number | Application | |
|---|---|---|---|---|
Gira | DALI-Gateway Plus | 2180 00 | DALI Gateway C00D11 | |
DALI-Gateway Plus | 1060 2180 00 | DALI DALI Gateway C00C13C00D12 | ||
DALI-Gateway Tunable White Plus | 1060 2108 00 | DALI DALI Gateway C00C11TW C02011 | ||
DALI-Gateway Tunable White Plus | 2180 2108 00 | DALI Gateway TW C02012 | ||
Jung | DALI-Gateway Plus | 2098REGHE | DALI Gateway C00D11 | |
DALI-Gateway Plus | 2180 002099REGHE | DALI DALI Gateway C00D12 | ||
DALI-Gateway Tunable White Plus2108 00TW | 2099REGHE | DALI Gateway TW C02011 | ||
DALI-Gateway Tunable White Plus | 2108 00 | DALI TW | 2099REGHE | DALI Gateway TW C02012 |
Configuration
...
| Warning |
|---|
In order to use the object "Error per DALI device" within our LaMPS module, it is important to active the following options within the parameters of the device:   |
The objects Fault General (#1524) and Emergency Lighting Failure (#1542) can be configured as passive or active feedback objects. If at least one of them is set as passive, "Poll Device" should be set to true.
...
In addition, the following device-specific items are available under the sub tree "Emergency":
item name | description |
|---|---|
Emergency Lights On/Off | True, if the gateway is in emergency mode. |
Emergency Lighting Failure | True, if there is an emergency failure of at least one emergency DALI light. |
...
item name | description |
|---|---|
Name | Human-readable name of the DALI device. The default name is "Device<number>". This name can be changed within the Device Name Mapping Definitions. |
Fault | True, if either a lamp or a device fault occurred. |
Fault Lamp | True, if there is a lamp fault. |
Fault Ballast | True, if there is a ballast fault. |
Fault Converter | (Emergency lighting only) True, if there is a converter fault. |
Test succeeded | True, if a response is received during the test. |
...