...
For a detailed description see Annex A.1 of the manual of the BMS Client Editor (available via the menu "Help").
Implementing blind control
As next, a simple blind control shall be added to floor 1. Insert three new buttons from the library. "Button-Blinds-Up-Rect", "Button-Blinds-Down-Rect" and "Button-Stop-Rect" and place them at the top left corner of the visualization. Make them the same size as the other buttons and align them in a way that they have the same space and that the aligned according to the top edge. To achieve this, select them and use the corresponding menu entries within the context menu.
Double-click the "Down" button and change to the "Object" tab. As operating mode select "Toggle Down", select the KNX group address for Up/Down and enter "1" (1 means moving the blind down) within the text field for the value. Do the same for the "Up" button but use the value "0" (0 means moving the blind down). For the "Stop" button, select the KNX group address for "Slat adjustment/Stop" and enter "0" as value (0 means stopping the blind). The following figure shows the configuration of the "Down" button.
Heating/cooling room control
Testing the visualization in a web browser or on your smart phone
...