...
To start, open the BMS Studio. First, configure the IP address and port number that you have enter within the web service URL.This can be done by selecting "Driver Configuration" within the menu "Modules" -> "Kaba".Fidelio/Opera". If this information is not known, please ask the Fidelio/Opera integrator.
| Info |
|---|
In addition the IP address and the port number, there are several configuration options which depend on the IFC settings at the Fidelio/Opera side. Normally, you can leave the default options. If the communication is not working correctly, please ask the Fidelio/Opera integrator whether "LRC" or "Use Ack" option have to be used. |
Then, the used devices have to be created. This is done within the "Device definitions" within the menu "Modules" -> "Kaba". Each definition line corresponds to one device. The first column defines the device name. The device name must be unique and is shown within the item tree the NETx BMS Server. The next column "Device ID" is optional. "Device Name" and "Device ID" are used to assign a web service notification to the corresponding item within the item tree. This means that either "Device Name" or "Device ID" must be the same as the Kaba software uses within the web service request. The 3rd column "Path" is used to define an optional structure within the item tree. "Description" is used to provide additional information which is stored within the item property "Description". The remaining field "Persistent", "Historical" and "Synchronize" have the same functionality as for all other interfaces within the NETx BMS Server. The following figure shows an example where 1 door lock is defined. In addition, the ZigBee/IP called "Hub Floor1" is also defined in order to receive events dedicated to the ZigBee/IP hub.
...