...
In BMS Server adding a Secure Broker can be easily done.
| Parameter | Description |
|---|---|
Name | The given name of the Broker in BMS Server |
Path | The generated Path in Item Tree |
IP address | The IP address of the Broker |
Auto-Reconnect | The Reconnect time interval for the BMS Server to try to connect to the Broker if the Connection lost. |
Port | Port number |
Client ID | The Client ID that will be used at Broker |
Client username | If the Broker requires Authentication with a Username and a Password. |
Client Password | If the Broker requires Authentication with a Username and a Password. |
TLS[] | Enable/Disable TLS Connection to the Server |
TLS Version | Support many versions of TLS Connections. |
*CA -Cer[] | Certificate name |
CA-Password | Password for Certificate for self-signed Certificates. |
...
Non-secure Broker supports only a TCP plain connection between Client and the Broker. To configure a non-secure Broker in BMS Server the IP Address and the Port usually 1883 is used.
After configuring the Broker, changes must be saved and the BMS Server needs to be restarted.
...
In Broker definitions we added the connection configuration. But those Brokers should be represented in the BMS Server, and this Connections representation in BMS Server done by creating a Datapoint or many Datapoints for each of the Brokers. This Datapoint will make this Broker interactive and reachable in BMS Server. This Reachability will also allow other Datapoints form other Automation System like KNX or BACnet to interact with this Broker.
Parameter | Description |
|---|---|
Name | Should be the same as defined Broker Name in Broker definitions |
Path | Should be the same as defined Broker Path in Broker definitions |
Topic | The topic of subscription |
Data type | Data type of the Value BMS has two data types: REAL or String |
Port | Port number |
Access mode | Read, Read and Write or Write. |
Persistent | This parameter specifies whether the value of the datapoint is persistent (restored from the database after server start up) or not. |
Historical | This parameter specifies whether historical values of the datapoint are stored within the database or not. |
Synchronize | If this parameter is set to “True (T)”, the value is synchronized between the main and backup server (if present). |
