...
Parameter | UDP.SendBroadcastAsMultipleUnicast |
|---|---|
Description | It defines whether the "BROADCAST" telegrams are sent as IP broadcast packets or as multiple unicast packets to each single router. |
Scope | ON, OFF |
Unit | None |
Default value | OFF |
Parameter | UDP.NetworkCardIPAddress |
|---|---|
Description | It specifies the IP address of the network interface which is used to communicate with ABB IG/S gateways. If no IP address is specified, the IP address of the system's default network interface is used. |
Scope | IP address |
Unit | None |
Default value | IP address of the default network interface |
...
Parameter | IGS.ReceiveMulticastAddress |
|---|---|
Description | It defines the multicast group (multicast IP address) that is used to communicate with ABB IG/S gateways. |
Scope | IP address |
Unit | None |
Default value | 239.192.39.238 |
...
The following parameters are only relevant for eibNode gateways:
...