...
Parameter | OPC.Delimiter |
|---|---|
Description | It specifies which delimiter shall be used for the item IDs within the server item tree. |
Scope | String (" not allowed) |
Unit | None |
Default value | \ |
| Info |
|---|
| Info |
|---|
! Following OPC parameters are available only for compatibility reasons. In future versions they may vanish. |
TODO: still exist
...
Parameter
...
OPC.AsyncWriteConfirmation
...
Description
...
It specifies whether the response data of the asynchronous OPC value write queries ("WRITE") shall be read from the server's data base, or whether it shall directly be retrieved from the field device. ON - the field devices are queried OFF - the values are read from the server's data base
...
Scope
...
ON, OFF
...
Unit
...
None
...
Default value
...
OFF
!Attention: If the parameter is set on "ON", each OPC "WRITE" command will result in sending up telegrams to the field network. In the case of KNX, up to three KNX telegrams are sent. |
...