Parameter | SYS. |
|---|
Description
Enables or disables the storing of historical values into the SQL database.
Scope
ON, OFF
Unit
None
Default value
ON
Parameter
SYS.BackupHistorizing
Description
If enabled, the backup server also stores historical values in the historical database even if the backup server is inactive.
Scope
ON, OFF
Unit
None
Default value
OFF
Parameter
UseTelegramDataFile | |
|---|---|
Description | It specifies whether a virtual image of the plant (i.e. the values of all defined datapoints) is written to disk. |
Scope | ON, OFF |
Unit | None |
Default value | ON |
Parameter | SYS.SendVirtualTelegrams |
|---|---|
Description | Enables or disables the sending of telegrams for KNX main group addresses above 15. |
Scope | ON, OFF |
Unit | None |
Default value | OFF |
...
Parameter | SYS.MaxSizeOfTelegramLogFile |
|---|---|
Description | It specifies the maximum size of the telegram log file. |
Scope | 1 - 1000 |
Unit | Megabyte |
Default value | 10 |
...
Parameter | SYS.SpinTelegramFile |
|---|---|
Description | If enabled a new telegram log file is created every day. |
Scope | ON, OFF |
Unit | None |
Default value | ON |
...
Parameter | SYS.EnableDeviceManager |
|---|---|
Description | This parameter enables the physical KNX device management. ON - the physical device management is enabled OFF - the physical device management is disabled |
Scope | ON, OFF |
Unit | None |
Default value | ON |
Parameter | SYS.OPCInterfaceEnabled |
|---|---|
Description | Enables the OPC Server. For security reasons, default is OFF. |
Scope | ON, OFF |
Unit | None |
Default value | OFF |
Parameter | SYS.GenerateRandomValues |
|---|---|
Description | If the server is running in simulation mode and this parameter is set to "ON", the server generates random values for all server items. ON - the server generates random values if the server is running OFF - The server does not generate random values |
Scope | ON, OFF |
Unit | None |
Default value | ON |
...