...
Parameter | SYS.EnableOperationTime |
|---|---|
Description | The server will calculate the operation time in seconds of KNX datapoints that are of type EIS1. ON - the operation time calculation is enabled OFF - the operation time calculation is disabled |
Scope | ON, OFF |
Unit | None |
Default value | OFF |
Parameter | SYS.CodePage |
|---|---|
Description | Defines the code page that is used within the NETx BMS Core Server. |
Scope | 1 - 65535 |
Unit | None |
Default value | 1250 |
Parameter | SYS.GeoLatitude |
|---|---|
Description | This parameter specifies the geographic latitude in degrees (+ is used for north, - for south) |
Scope | 0 - 360 |
Unit | degrees |
Default value | 0 |
...
Parameter | SYS.GatewayConnectionTimeoutAttemptCount |
|---|---|
Description | It specifies the number of call attempts for the availability check of the connection of the connected KNXnet/IP routers in the case of an interruption. |
Scope | 1 - 10 |
Unit | None |
Default value | 3 |
Parameter | SYS.CodePage |
Description | Defines the code page that is used within the NETx BMS Core Server. |
Scope | |
Unit | None |
Default value | 1250 |
Parameter | SYS.SpinLogFile |
|---|---|
Description | ON - the system log file switches to a new file every day. OFF - the system log file remains in the same file as long as the server is running. |
Scope | ON, OFF |
Unit | None |
Default value | OFF |
...