...
Parameter | UDP.NetworkCardIPAddress |
|---|---|
Description | It specifies the IP address of the network interface which is used to communicate with ABB IG/S gateways. If no IP address is specified, the IP address of the system's default network interface is used. |
Scope | IP address |
Unit | None |
Default value | IP address of the default network interface |
The following parameters are only relevant for ABB IG/S 1.1 gateways:
...
Parameter
...
IGS.ReceiveMulticastAddress
...
Description
...
It defines the multicast group (multicast IP address) that is used to communicate with ABB IG/S gateways.
...
Scope
...
IP address
...
Unit
...
None
...
Default value
...
239.192.39.238
The following parameters are only relevant for eibNode gateways:
...
Parameter
...
eibNode.SenderNetID
...
Description
...
It specifies the eibNode NetID for outgoing telegrams.
...
Scope
...
0 255
...
Unit
...
None
...
Default value
...
0
...
Parameter
...
eibNode.ReceiverNetIDFilter
...
Description
...
It specifies the NetIDs of telegrams which are accepted by the server. If this parameter is left empty, all eibNode telegrams are accepted. For example, if "eibNode.ReceiverNetIDFilter" is set to "0,2,3,7", only the telegrams with a NetID of 0,2,3, or 7 are accepted.
...
Scope
...
Comma separated list of values that are in the range of 0 - 255 (e.g. 0,15,36,223)
...
Unit
...
None
...
Default value
...
The following parameters are only relevant for KNXnet/IP devices:
...