...
Info |
---|
! The virtual "BROADCAST" gateway is added by the system and must not be defined in the table. |
1 | IP Address | IP | This attribute specifies the IP address of the KNXnet/IP gateway. The IP address is also used to uniquely identify the gateway within the server. Therefore, it must be unique within the whole network. |
2 | Gateway Type | Enum | The type of the KNXnet/IP gateway. Supported types are
|
|
|
|
|
|
| |
3 | Port |
UDP or TCP port | This attributes represents the UDP or TCP port number which is used to connect to the gateway. |
4 | Name |
String | It is used to give the gateway a human-readable name (can be any user-defined string). |
5 | Locality |
String | This attribute can be used to specify the location of the gateway (can be any user-defined string). |
6 | Description |
String | This attribute can be used to specify a human-readable text that further describes the gateway (can be any user-defined string). |
7 | Source phys. KNX Address |
KNX phys. address | The phys. KNX address used by the NETx BMS Core. Only used for KNXnet/IP routing. | ||
8 | Network Card IP Address | IP | The local network card IP address used by the NETx BMS Core. Only used for KNXnet/IP routing. |
9 | Management Code | String | The management code used for authentication to a secure KNXnet/IP tunnelling device. This must be identical to the code used within the ETS. |
10 | Authentication Code | String | The authentication code used for authentication to a secure KNXnet/IP tunnelling device. This must be identical to the code used within the ETS. |