Parameter | SYS. |
|---|
Description
It specifies whether a virtual image of the plant (i.e. the values of all defined datapoints) is written to disk.
Scope
ON, OFF
Unit
None
Default value
ON
Parameter
SendVirtualTelegrams | |
|---|---|
Description | Enables or disables the sending of telegrams for KNX main group addresses above 15. |
Scope | ON, OFF |
Unit | None |
Default value | OFF |
Parameter | SYS.MaxSizeOfTelegramLogFile |
|---|---|
Description | It specifies the maximum size of the telegram log file. |
Scope | 1 - 1000 |
Unit | Megabyte |
Default value | 10 |
...
Parameter | SYS.CodePage |
|---|---|
Description | Defines the code page that is used within the NETx BMS Core Server. |
Scope | 1 - 65535 |
Unit | None |
Default value | 1250 |
Parameter | SYS.LoggingLevel |
|---|---|
Description | System logging level for providing additional output to server logs |
Scope | -65535 - 65535 |
Unit | None |
Default value | 0 |
Parameter | SYS.GeoLatitude |
|---|---|
Description | This parameter specifies the geographic latitude in degrees (+ is used for north, - for south) |
Scope | 0 - 360 |
Unit | degrees |
Default value | 0 |
...