Parameter
Unit
ScopeDefault value
Unit
Scope
Default value
Parameter
For security reasons, default is OFF.
Unit
Parameter
Default value
Parameter
Description
Parameter
Scope
Default value
Parameter
Unit
Scope
Parameter
Scope
Unit
Default value
Parameter
Unit
Default value
| Name | Description | Scope | Unit | Default | Notes |
|---|---|---|---|---|---|
| SYS.SendVirtualTelegrams |
Description
| Enables or disables the sending of telegrams for KNX main group addresses above 15. |
Scope
| ON, OFF |
| None |
Default value
| OFF |
Parameter
| SYS.MaxSizeOfTelegramLogFile |
Description
| Specifies the maximum size of the telegram log file. |
| 1 - 1000 |
Unit
Megabyte
| MB | 10 |
Parameter
| SYS.SpinTelegramFile |
Description
| If enabled a new telegram log file is created every day. |
Scope
| ON, OFF |
| None |
Default value
| ON |
Parameter
| SYS.EnableDeviceManager |
Description
Enables the physical KNX device management. ON - the physical device management is enabled OFF - the physical device management is disabled |
| ON, OFF |
Unit
| None |
| ON |
| SYS.OPCInterfaceEnabled |
Description
| Enables the OPC Server. |
Scope
| ON, OFF |
| None |
Default value
| ON |
| SYS.GenerateRandomValues |
Description
| If the server is running in simulation mode and this parameter is set to "ON", the server generates random values for all server items. ON - the server generates random values if the server is running OFF - The server does not generate random values |
Scope
| ON, OFF |
Unit
| None |
| ON |
| SYS.EnableOperationTime |
| The server will calculate the operation time in seconds of KNX datapoints that are of type EIS1. ON - the operation time calculation is enabled OFF - the operation time calculation is disabled |
Scope
| ON, OFF |
Unit
| None |
Default value
| OFF |
| SYS.CodePage |
Description
| Defines the code page that is used within the NETx BMS Core Server. |
| 1 - 65535 |
Unit
| None |
| 1250 |
| SYS.LoggingLevel |
Description
| System logging level for providing additional output to server logs |
Scope
| -65535 - 65535 |
Unit
| None |
Default value
| 0 |
Parameter
| SYS.GeoLatitude |
Description
| Specifies the geographic latitude in degrees (+ is used for north, - for south) |
Scope
| 0 - 360 |
| degrees |
Default value
| 0 |
Parameter
| SYS.GeoLongitude |
Description
| Specifies the geographic longitude in degrees (+ is used for east, - for west) |
| 0 - 360 |
Unit
| degrees |
Default value
| 0 |
| SYS.GeoElevation |
Description
| Specifies the geographic elevation in meters. |
Scope
Default value
| 0 - 10000 |
Unit
meters
| m | 0 | ||||||
| |||||||
Parameter
| SYS.GatewayConnectionTimeout | |||||
Description
| Specifies the timeout value for availability check of the connected KNXnet/IP routers. |
Scope
| 10 - 10000 |
Unit
milliseconds
Default value
500
| ms | 500 | |
| SYS.GatewayConnectionTimeoutAttemptCount |
Description
| Specifies the number of call attempts for the availability check of the connection of the connected KNXnet/IP routers in the case of an interruption. |
| 1 - 10 |
| None |
| 3 |
| SYS.SpinLogFile |
Description
| ON - the system log file switches to a new file every day. OFF - the system log file remains in the same file as long as the server is running. |
Scope
| ON, OFF |
| None |
| OFF |
Article applies to the following products:
...