Configuration
...
| parameter | type | optional/mandatory | communication object | description | default |
|---|---|---|---|---|---|
| Manual detect all ballasts | ItemId | M | KNX Object #5 | True, if there is a power failure at the DALI gateway. | |
| Fault Lamp | ItemId | M | KNX Object #16 | True, if at least one DALI device has a Lamp fault. | |
| Fault Ballast | ItemId | M | KNX Object #17 | True, if at least one DALI device has a Ballast fault. | |
| DALI Manage Request | ItemId | M | KNX Object #6#639 | Used to request the error status of a DALI device. | |
| DALI Manage Response | ItemId | M | KNX Object #6#640 | Response object for error status of a DALI device. | |
| DALI bus fault | ItemId | O | KNX Object #8 | True, if the is a fault at the DALI bus. |
...
Fault information is provided by the following Server Items which are located directly under the gateway branch within the Server Item Tree:
| item name | description |
|---|---|
| KNX IP Connection | This Item reflects the KNXnet/IP tunneling connection to KNXnet/IP router or interface which is used to communicate with the KNX/DALI gateway. |
| Fault | True, if there is either a power failure, short circuit, presence, ballast or lamp fault. |
| Fault Device | True, if there is a lamp or ballast failure for at least 1 DALI device. |
| Fault Ballast | True, if there is a ballast fault of one or more DALI devices on the channel. |
| Fault Lamp | True, if there is a lamp fault of one or more DALI devices on the channel. |
| Fault DALI | True, if the is a fault at the DALI bus. |
For DALI testing, the following Server Items are available:
| item name | description |
|---|---|
| Trigger Test | Used to trigger a normal DALI test for all devices. |
| Test Running | True, when a normal DALI test is currently running. |
For each configured DALI device, a sub tree with the name "Device<number>" is shown within the Server Item Tree. Each device has the following Server Items:
| item name | description |
|---|---|
| Name | Human-readable name of the DALI device. The default name is "Device<number>". This name can be changed within the Device Name Mapping Definitions. |
| Fault | True, if either a lamp or a ballast fault occurred. |
| Fault Lamp | True, if there is a lamp fault. |
| Fault Ballast | True, if there is a ballast fault. |
| Test Succeeded | True, if a response is received during the test. |