| item name | description |
|---|
| Test Running | True, when an emergency DALI test is currently running. |
| Start Function Test | Used to trigger a function test for this device. |
| Start Duration Test | Used to trigger a duration test for this device. |
| Start Partial Duration Test | Used to trigger a partial duration test for this device. |
| Start Battery Test | Used to trigger a battery test for this device. |
| Last test was | Shows the type of the last test. | value | description |
|---|
| 0 | "No Test" | | 1 | "Function Test" | | 2 | "Partial duration test" | | 3 | "Duration test" | | 4 | "Battery test" | | 255 | "Test not supported" |
|
| Last test faulted | True, if there was no test result response. This may be the case when the DALI does not support emergency tests. |
| Circuit defect | True, if the circuit is defect. |
| Fault battery | True, if there is a battery fault. |
| Battery defect | True, if the battery is defect. |
| Fault emergency light | True, if there is an emergency light failure. |
| Max time function test exceeded | True, if the maximum time for the function test exceeded. |
| Max time duration test exceeded | True, if the maximum time for the duration test exceeded. |
| Function test failed | True, if the function test failed. |
| Duration test failed | True, if the duration test failed. |
| TestResult | Test result: The raw data as received from the gateway. Time results have to be multiplied by 2 minutes; Battery charge status is from 0 to 255 and has to be converted to percentage. |