Configuration
...
| parameter | type | optional/mandatory | communication object | description | default |
|---|---|---|---|---|---|
| Manual detect all ballasts | ItemId | M | KNX Object #5 | If true is sent to this object, a status request for Fault Lamp, Fault Ballast and DALI bus fault is triggered. | |
| Fault Lamp | ItemId | M | KNX Object #16 | True, if at least one DALI device has a Lamp fault. | |
| Fault Ballast | ItemId | M | KNX Object #17 | True, if at least one DALI device has a Ballast fault. | |
| DALI Manage Request | ItemId | M | KNX Object #639 | Used to request the error status of a DALI device. | |
| DALI Manage Response | ItemId | M | KNX Object #640 | Response object for error status of a DALI device. | |
| DALI bus fault | ItemId | O | KNX Object #8 | True, if the is a fault at the DALI bus. |
...
| item name | description |
|---|---|
| KNX IP Connection | This Item reflects the KNXnet/IP tunneling connection to KNXnet/IP router or interface which is used to communicate with the KNX/DALI gateway. |
| Fault | True, if there is either a DALI failure, ballast or lamp fault. |
| Fault DeviceDevices | True, if there is a lamp or ballast failure for at least 1 one DALI device. |
| Fault BallastLamp | True, if there is a ballast lamp fault of one or more DALI devices on the channel. |
| Fault LampBallast | True, if there is a lamp ballast fault of one or more DALI devices on the channel. |
| Fault DALI | True, if the is a fault at the DALI bus. |
...