...
| item name | description |
|---|---|
| KNX IP Connection | This Item reflects the KNXnet/IP tunneling connection to KNXnet/IP router or interface which is used to communicate with the KNX/DALI gateway. |
| Fault | True, if there is either a DALI, lamp, or ballast fault. |
| Fault DALI | True, if there is a general short cut on the DALI bus. |
| Fault DeviceDevices | True, if there is a lamp or ballast fault for at least 1 DALI device. |
| Fault LampsLamp | True, if the amount of lamp faults exceeds the configured threshold. If exceeded, LaMPS is starting to test all configured devices in order to see which device(s) have a fault. |
| Fault Ballast | True, if the amount of ballast faults exceeds the configured threshold. If exceeded, LaMPS is starting to test all configured devices in order to see which device(s) have a fault. |
| Fault Converter | True, if there is a converter fault of one or more DALI devices. |
Since these gateways also support emergency lighting, it has to be distinguished between a normal DALI test and an emergency DALI test.
...
For emergency DALI testing, the following Server Items are available under the sub tree "Emergency":
| item name | description | Fault Converter | True there is the amount emergency failures exceeds the configured threshold.|
|---|---|---|---|
| Start Function Test | Used to trigger a function test for all emergency DALI lights. | ||
| Start Duration Test | Used to trigger a duration test for all emergency DALI lights. | ||
| Start Partial Duration Test | Used to trigger a partial duration test for all emergency DALI lights. | Start Battery Test | Used to trigger a battery test for all emergency DALI lights. |
| Stop Test | Used to stop a running test. | ||
| Emergency Light Test Running | True, when an emergency DALI test is currently running. |
...
For each configured DALI device, a sub tree with the name "Device<number>" is shown within the Server Item Tree. Each device has at least the following Server Items:
| item name | description |
|---|---|
| Name | Human-readable name of the DALI device. The default name is "Device<number>". This name can be changed within the Device Name Mapping Definitions. |
| Fault | True, if either a lamp or a device fault occurred. |
| Fault Lamp | True, if there is a lamp fault. |
| Fault Ballast | True, if there is a device fault. |
| Test |
| succeeded | True, if a response is received during the test. |
If a device is also an emergency light (i.e. it has a valid emergency mapping definition), the following items are available in the sub tree "Emergency":
| item name | description | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Test Running | True, when an emergency DALI test is currently running. | ||||||||||||||
| Start Function Test | Used to trigger a function test for this device. | ||||||||||||||
| Start Duration Test | Used to trigger a duration test for this device. | ||||||||||||||
| Start Partial Duration Battery Test | Used to trigger a partial duration battery test for this device. | ||||||||||||||
| Start Battery Stop Test | Used to trigger a battery test for this devicestop a running test. | ||||||||||||||
| Last test was | Shows the type of the last test.
| ||||||||||||||
| Last test faulted | True, if there was no test result response. This may be the case when the DALI does not support emergency tests. | ||||||||||||||
| Converter defect | True, if the converter is defect. | ||||||||||||||
| Fault battery | True, if there is a battery fault. | ||||||||||||||
| Battery defect | True, if the battery is defect. | ||||||||||||||
| Fault emergency light | True, if there is an emergency light failure. | ||||||||||||||
| Max time function test exceeded | True, if the maximum time for the function test exceeded. | ||||||||||||||
| Max time duration test exceeded | True, if the maximum time for the duration test exceeded. | ||||||||||||||
| Function test failed | True, if the function test failed. | ||||||||||||||
| Duration test failed | True, if the duration test failed. | ||||||||||||||
| Test result | Test result: The raw data as received from the gateway. Time results have to be multiplied by 2 minutes; Battery charge status is from 0 to 255 and has to be converted to percentage. |
| Include Page | ||||
|---|---|---|---|---|
|