Configuration
...
| Info |
|---|
Please keep in mind that these items will only appear when emergency testing is available for the gateway. For these KNX/DALI gateways at least one DALI device must support emergency lighting tests. This means that there must be a "Emergency Mapping Definition" for at least one DALI device. Note that emergency testing is only available for self contained battery lamps. |
...
For each configured DALI device, a sub tree with the name "Device<number>" is shown within the Server Item Tree. Each device has at least the following Server Items:
| item name | description |
|---|---|
| Name | Human-readable name of the DALI device. The default name is "Device<number>". This name can be changed within the Device Name Mapping Definitions. |
| Fault | True, if either a lamp or a device fault occurred. |
| Fault Lamp | True, if there is a lamp fault. |
| Fault Ballast | True, if there is a ballast fault. |
| Fault Converter | (Emergency lighting only) True, if there is a converter fault. |
| Test succeeded | True, if a response is received during the test. |
...
If a device is also an emergency light (i.e. it has a valid emergency mapping definition), the following items are available in the sub tree "Emergency":
...