Configuration
...
| parameter | type | optional/mandatory | communication object | description | default |
|---|---|---|---|---|---|
| Fault Lamps | ItemId | M | KNX Object #17, polled | True, if there is a lamp error for at least 1 DALI device. | |
| Fault Ballast | ItemId | M | KNX Object #18, polled | True, if there is a ballast error for at least 1 DALI device. | |
| Fault DALI | ItemId | O | KNX Object #19, polled | True, if there is a general DALI error. | |
| Diagnostics | ItemId | M | KNX Object #25#20 | Used to trigger a normal DALI request and to get the test result. | |
| Emergency Test Start | ItemId | O | KNX Object #31 | Used to trigger an emergency DALI test for a dedicated device. | |
| Emergency Test Result | ItemId | O | KNX Object #33 | Used to get the result of an emergency DALI test. | |
| Emergency Mode Active | ItemId | O | KNX Object #35 | True, if the DALI emergency lighting mode is active. | |
| Emergency Test Interval | int | O | Specifies how long the driver will wait between sending two emergency start requests. | 10 s |
| Info |
|---|
The ABB DGN/S 1.16.1 gateway uses emergency test start and result objects for all devices on one channel – there are no individual objects for each emergency ballast as it is for other gateways. Therefore, there will appear no entry within the Emergency Mapping Definitions. If the emergency configuration is enabled it will appear within the ABB DGN/S 1.16.1 gateway definition. |
Functional Description
These KNX/DALI gateway types provide 1 with up to 64 DALI devices. In addition to normal DALI testing, they support emergency lighting and extended tests for emergency lighting too.
...