Configuration
...
Include Page Normal DALI testing server items Normal DALI testing server items
For emergency DALI testingInclude Page Emergency testing server items Emergency testing server items
In addition, the following Server Items device-specific items are available under the sub tree "Emergency":
| item name | description |
|---|---|
| Emergency Lights On/Off | True, if the gateway is in emergency mode. |
| Emergency Lighting Failure | True, if there is an emergency failure of at least one emergency DALI light. |
| Start Function Test | Used to trigger a function test for all emergency DALI lights. |
| Start Partial Duration Test | Used to trigger a partial duration test for all emergency DALI lights. |
| Start Duration Test | Used to trigger a duration test for all emergency DALI lights. |
| Start Battery Test | Used to trigger a battery test for all emergency DALI lights. |
| Stop Test | Used to stop a running test. |
| Emergency Lights Test Running | True, if an emergency DALI test is currently running. |
| Info |
|---|
Please keep in mind that these items will only appear when emergency testing is available for the gateway. For these KNX/DALI gateways at least one DALI device must support emergency lighting tests. This means that there must be a "Emergency Mapping Definition" for at least one DALI device. Note that emergency testing is only available for self contained battery lamps. |
...
| item name | description |
|---|---|
| Name | Human-readable name of the DALI device. The default name is "Device<number>". This name can be changed within the Device Name Mapping Definitions. |
| Fault | True, if either a lamp or a device fault occurred. |
| Fault Lamp | True, if there is a lamp fault. |
| Fault Ballast | True, if there is a ballast fault. |
| Fault Converter | (Emergency lighting only) True, if there is a converter fault. |
| Test succeeded | True, if a response is received during the test. |
...