The configuration of the main/backup functionality is done in the Main/Backup configuration file.Location:
| Info | ||
|---|---|---|
| ||
<WorkspaceDirectory>\ConfigFiles\ |
...
nxaXLink.40.cfg |
...
Within this configuration, all main/backup settings are specified. Each parameter is identified with a name. The name is case-insensitive (i.e. capitalization is not considered). The scope indicates the allowed values of the parameter. The default value specifies the values that is used when no value is set by the user.
...
Parameter
...
XLINK.Redundancy
...
Description
...
The IP address (e.g. 192.168.1.100) of the network interface of the main server.
...
Scope
...
ON, OFF
...
Unit
...
None
...
Default value
...
OFF
...
| Parameter | Description | Scope | Unit | Default value |
|---|---|---|---|---|
| XLINK.Redundancy | If ON, the main/backup functionality will be activated. | ON, OFF | None | OFF |
| XLINK.MainServerIPAddress |
Description
The IP address |
of the main server's network interface |
. |
| IP |
| address |
Unit
| None |
Default value
| None |
| XLINK.BackupServerIPAddress |
Description
| The IP address |
| of the backup server's network interface |
| . |
Scope
| IP |
| address | None |
Default value
| None |
Parameter
| XLINK.MainServerPort |
| TCP port |
| for |
| secure connection to |
| main server |
Unit
Scope
TCP Port
| 1 – 65535 | None |
Default value
| 14732 |
Parameter
| XLINK.Password |
Description
| TLS connection password for second server |
Scope
| String |
| None |
| None |
Parameter
| XLINK.PIN |
Description
| TLS connection PIN of this server. |
| String |
Unit
| None |
Default value
| None |
Parameter
| XLINK.ConnectionTimeout |
| Specifies the timeout for a detecting a lost connection to the second server. If the second server does not response within the given time interval, it will assume that the second server is down. |
Scope
| 1 - 600 |
Unit
seconds
| s | 10 |
Article applies to the following products:
...