The configuration of the main/backup functionality is done in the Main/Backup configuration file.Location:
| Info |
|---|
File location<WorkspaceDirectory>\ConfigFiles\ |
...
nxaXLink.40.cfg |
...
In Core Studio, the configuration can be accessed via Menu → Modules → Core → Main/Backup configuration …
Parameter | Description | Scope | Unit | Default value |
|---|---|---|---|---|
XLINK.Redundancy | If |
ON, the main/backup functionality will be activated. | ON |
, OFF | None | OFF |
XLINK.MainServerIPAddress | The IP address |
of the main server's network interface |
. | IP address | None | None |
XLINK.BackupServerIPAddress | The IP address |
of the backup server's network interface |
. | IP address | None | None |
XLINK.MainServerPort |
TCP port |
for |
secure connection to |
main server |
1 – 65535 | None | 14732 |
14732
XLINK.Password | TLS connection password for second server |
String | None | None |
XLINK.PIN | TLS connection PIN of this server. |
String | None | None |
XLINK.ConnectionTimeout | Specifies the timeout for a detecting a lost connection to the second server. If the second server does not response within the given time interval, it will assume that the second server is down. | 1 |
– 600 |
s | 10 |
...
XLINK.CommandTimeout | Specifies the timeout in seconds of VNET commands between main and backup server. | 1 – 10000 | s | 30 |
Article applies to the following products:
NETx BMS Platform
NETx Multi Protocol Server