Location:
<WorkspaceDirectory>\ConfigFiles\xio.SNMP.cfgWithin this configuration files, general configuration parameters of the SNMP client interface are set. Each parameter within the SNMP configuration file is identified with a name. The name is case-insensitive (i.e. capitalization is not considered). The scope indicates the allowed values of the parameter. The default value specifies the values that is used when no value is set by the user.
...
Parameter
...
XIO:SNMP.DefaultCommunityString
...
| Info | ||
|---|---|---|
| ||
<WorkspaceDirectory>\ConfigFiles\xio.SNMP.cfg |
| Parameter | Description | Scope | Unit | Default value |
|---|---|---|---|---|
| XIO.SNMP.DefaultCommunityString | This parameter is used to enable the authentication on the SNMP devices. If no string value is set by the user, the default community string is used. |
Parameter
XIO:SNMP.TrapPath
Description
Here, the path name is specified in which the trap items of a SNMP device are collected. If a specific name is required, the value can be set individually.
Scope
string
Unit
None
Default value
Traps
Parameter
XIO:SNMP.DefaultGatewayItem
Description
| string |
Unit
None
Default value
public
Parameter
XIO:SNMP.PollingPath
Description
The server items of the SNMP devices for polling MIB information are grouped in different paths. If a specific naming convention is required, the value can be set individually.
Scope
string
Unit
None
Default value
Polling
Parameter
XIO:SNMP.UsePollingPath
Description
If set to TRUE, the path provided in XIO:SNMP.PollingPath is used to create the polling items. Otherwise, the polling items are created in the device branch below the gateway data point.
Scope
TRUE, FALSE
Unit
None
Default value
FALSE
| none | public |
| XIO.SNMP.DefaultGatewayItem | The Core Server checks the availability of the SNMP device in the network on a standard item. This value specifies on which OID value the server should query the device. |
| string |
Unit
None
| OID | 1.3.6.1.2.1.1.1.0 |
| XIO |
| .SNMP.DefaultTimeout |
| Each time the |
| Core Server queries the SNMP device for the configured items, the server waits for the configured time span for a response message. |
| 1000 - 60000 |
Unit
None
Default value
| ms | 3000 | |||
| XIO.SNMP.IgnoreUnavailableLocalEndpoints | If activated, the SNMP driver will start if at least one valid listener if available. If deactivated, the driver will stop opening further listeners after the first error. | true/false | none | true |