| Table of Contents |
|---|
Check remaining days in demo period
After installation, the BMS Platform software will run in demo mode.
The demo mode is limited to:
Time limit: 30 days
Number of clients: 2
Number of datapoints: 10000
To check how many days left in the demo period, open the Core Studio (ensure that the NETx server is running) and click from the menu Info > About NETx Server.
The popup window shows some server information and how many days are left in demo period.
...
...
Request and activate a license
To request and activate a license, open the Core Studio and click from the menu Info > License Manager ...
...
In the License Manager window the following data from the NETx invoice have to be entered:
License ID
License type
Number of clients (in case of a custom license)
Number of data points (in case of a custom license)
Licensed extensions
Click Copy this registration data to clipboard, open an email, paste the data from the clipboard there and send it to register@netxautomation.com.
The reply to your email contains the Unlock Code:
License
ID:
2019.06.012.99991System
Type:NETx
BMS
PlatformLicense
Type:ProfessionalLicense
Code:S12.04.0.00.0002.002.002000Local
Code:CAD70DFB-658B-B2ED-ABAA-BA8ADate:07/11/2019
08:38:36Setup
Version:4.1.2015Software
Version:4.0.5035.1969Unlock
Code:
371C0563-DC8158B6-0BA5D38F-93E5C5C1-CABAB664BC0B4CAFBCB58736824F1367A2FB4D17790BF41
Paste the unlock code from the email in the License Manager of your BMS system and click OK. Restart the server – your BMS system is now licensed.
Check your license
There are different ways to check the license of a BMS system:
Core Studio
>menu → Info
>→ License Manager …
Core Studio
>menu → Info
>→ About NETx Server
Core Studio
-→ System Messages
License Manager
The License Manager (Core Studio > Info > Menu → Info → License Manager ...) window shows details of your license.
...
About NETx Server
Open the Core Studio (ensure that the NETx server is running) and click from the menu Menu → Info > → About NETx Server.
Scroll down to see the details of the license.
...
System Messages
...
Transfer a license to another installation
If you
reinstall your BMS software on a new computer or virtual machine
make major hardware changes on your BMS server
move an existing virtual machine to a new host system
the purchased license has to be removed from the existing installation. This step is required to get a new license for the new BMS installation.
err
| Warning |
|---|
Note: The following step invalidates the current license. The BMS Server will not be stopped, but it cannot be restarted anymore! In order to ensure the further seamless operation of the new or changed system, it is important that you can receive the new license immediately. This is only possible during business hours, why it is strongly recommended, before the next step, to check whether NETxAutomation is able to promptly send you the new license. For it, get in touch by e-mail (office@netxautomation.com). If you do the following step out of business hours (weekend, holidays,…) you have to consider a waiting time until you get the new license. |
To generate the removal code, open the License Manager (Core Studio > Info > Menu → Info → License Manager ...) and click Transfer / Remove License.
Due to security reasons a second button Remove License now and a popup window appear. 
...
Click OK to generate the removal code.
| Warning |
|---|
After this step the BMS server will not start againServer cannot be restarted! |
The License Manager now shows the removal code:
Send the removal code to register@netxautomation.com.
| Note |
|---|
The removal code is required in order to get a new licence issued. |
To get the license for the new or changed system, follow the steps of section Softlock abovesection above.
Extending an existing license (additional data points, clients or extensions)
Existing licenses can be extended at any time, both as softlock and hardlock licenses. To do this, send a request to office@netxautomation.com stating the existing license ID and information about the desired changes.
After processing the purchase (offer, order, invoice) you will receive an upgrade file for Hardlock licenses by e-mail. For a Softlock license, you must remove the existing license and send a new license request to NETxAutomation - in the way as it is described in the license transfer section above.
Pricing
When transferring a license a re-licensing fee will be charged.