The interface configuration can be edited in the NETx Core Server Studio at Modules > Qlite> Interface Definitions
...
Col# | Parameter | Description | Scope | Unit | Default value |
|---|---|---|---|---|---|
1 | Name | Name of the interface. Must be unique. | string | None | |
2 | IP address | IP address of the QL-NE100 device. | IP-Address | None | |
3 | Port | UDP port of the QL-NE100 device. | Port number | None | 57277 |
4 | Send interval | Time delay between sending two messages. | integer | ms | 200 |
5 | Log messages | If set to true, all received and sent messages are logged in <WorkspaceDirectory>\LogFiles\nxaQlite-<InterfaceName>_<Datecode>.log | boolean | None | False |
6 | Ping after | Start pinging the interface after not receiving packets for this time period. | integer | s | 50 |
7 | Ping interval | Time between sending pings to the interface. | integer | s | 10 |
8 | Ping retries | Connection to the interface is considered lost after this amount of failed pings. | integer | None | 2 |
9 | Channel Ranges | Defines the channels that shall be available as server items. It is possible to define comma separated list that also contains ranges. E.g. 1-10,15,250-310. If left empty, no channels are available. | integer list | 1 - 512 | None |
10 | Show Service Items | If set to true, five service items will be shown for each interface. | boolean | None | False |
Send interval
The NETx Server has to request the current values of all devices on startup. This means a lot of requests will be sent at the same time. In order to avoid overloading of the bus, these messages are queued.
...
Key Card Inserted
Key Card Off
Do Not DisturbeDisturb
Make Up Room
Laundry
This These items are read only.