Location: <WorkspaceDirectory>\DataFiles\nxaGatewayDefinitions.40.dat
...
| Info |
|---|
| ! No telegrams are sent to the offline gateways. |
| Info |
|---|
! This definition file can also be generated using the ETS app import wizard (Studio → KNX → Inport NETx ETS App file ...) which generates the KNX gateway definitions from an exported ETS project. |
The structure of the gateway definition file is as follows:'Syntax of the Gateway Definition Table:
'IP Address;Type;Port;Name;Locality;Description ;Options'
192.168.1.2;NETIP;3671;Router1;;;;;;;
Each line – except comment lines that start with ' – defines a single KNXnet/IP gateway.
| Info |
|---|
! The virtual "BROADCAST" gateway is added by the system and must not be defined in the table. |
...
| IP | This attribute specifies | Specifies the IP address of the KNXnet/IP gateway. |
The IP address is also used to uniquely identify the gateway within the server. Therefore, it must be unique within the whole network. | IP address | None |
|
| 2 | Gateway Type |
Enum | The type of the KNXnet/IP gateway. Supported types are |
for - : secure KNXnet/IP tunnelling
|
, for - : native KNXnet/IP tunnelling
|
and for RoutingThis attributes represents the | SEC_NETIP, NETIP, NETIP_ROUTING | None |
|
| 3 | Port |
UDP or TCP port | It is used to give the gateway a | The UDP or TCP port number which is used to connect to the gateway. | UDP or TCP port number | None |
|
| 4 | Name |
String | | A unique human-readable name |
(can be any user-defined string)| . | String | None | The gateway's IP address. |
| 5 | Locality |
String | | This attribute can be used to specify the location of the gateway (can be any user-defined string). | String | None |
|
| 6 | Description |
String | The phys. | This attribute can be used to specify a human-readable text that further describes the gateway (can be any user-defined string). | String | None |
|
| 7 | Source phys. KNX Address |
KNX phys. address | | The physical KNX address used by the |
NETx BMS | Core Server when sending telegrams. Only used for KNXnet/IP routing. | KNX phys. address | None |
|
| 8 | Network Card IP Address |
IP | The local network card IP address used by the |
NETx BMS | Core Server. Only used for KNXnet/IP routing. | IP address | None |
|
| 9 | Management Code |
String | | The management code used for authentication to a secure KNXnet/IP tunnelling device. This must be identical to the code used within the ETS. | String | None |
|
| 10 | Authentication Code |
String | The authentication code used for authentication to a secure KNXnet/IP tunnelling device. This must be identical to the code used within the ETS. |
...
...