...
| Parameter | Description |
|---|
| Group telegrams (main group 0 to 13) | - Block: No group telegrams of these main groups are routed to KNX.
- Route: All group telegrams of this main group are routed to KNX independent of the filter table. This setting is used for testing purposes only.
- Filter: The filter table is used to check whether the received group telegram should be routed to KNX.
|
| Group telegrams (main group 14 to 31) | - Block: No group telegrams of main groups 14 to 31 are routed to KNX.
- Route: All group telegrams of the main groups 14 to 31 are routed to KNX. This setting is used for testing purposes only.
- Filter: The filter table is used to check whether the received group telegram should be routed to KNX.
|
| Individually addressed telegrams | - Block: No individually addressed telegrams are routed to KNX.
- Route: All individually addressed telegrams are routed to KNX.
- Filter: The individual address is used to check whether the received individually addressed telegram should be routed to KNX.
|
| Broadcast telegrams | - Block: No received broadcast telegrams are routed to KNX.
- Route: All received broadcast telegrams are routed to KNX.
|
| Repetition of group telegrams | - Disabled: The received group telegram is not resent to KNX in case of a fault.
- Enabled: The received group telegram is resent up to three times in case of a fault.
|
| Repetition of individually addressed telegrams | - Disabled: The received individually addressed telegram is not resent to KNX in case of a fault.
- Enabled: The received individually addressed telegram is resent up to three times in case of a fault.
|
| Repetition of broadcast telegrams | - Disabled: The received broadcast telegram is not resent to KNX in case of a fault.
- Enabled: The received broadcast telegram is resent up to three times in case of a fault.
|
Programming
The NETx KNX IP Secure Router 752 secure can be programmed in different ways by the ETS:
...