| Name | Description | Scope | Unit | Default | Notes |
|---|---|---|---|---|---|
| SYS.SendVirtualTelegrams | Enables or disables the sending of telegrams for KNX main group addresses above 15. | ON, OFF | None | OFF | |
| SYS.MaxSizeOfTelegramLogFile | Specifies the maximum size of the telegram log file. If size is exceeded, new records overwrite oldest records. | 1 - 1000 | MB | 10 | |
| SYS.SpinTelegramFile | If enabled a new telegram log file is created every day. | ON, OFF | None | ON | |
| SYS.EnableDeviceManager | Enables the physical KNX device management. ON - the physical device management is enabled OFF - the physical device management is disabled | ON, OFF | None | ON | |
| SYS.OPCInterfaceEnabled | Enables the OPC Server. | ON, OFF | None | ON | |
| SYS.GenerateRandomValues | If the server is running in simulation mode and this parameter is set to "ON", the server generates random values for all server items. ON - the server generates random values if the server is running OFF - The server does not generate random values | ON, OFF | None | ON | |
| SYS.EnableOperationTime | The server will calculate the operation time in seconds of KNX datapoints that are of type EIS1. ON - the operation time calculation is enabled OFF - the operation time calculation is disabled | ON, OFF | None | OFF | |
| SYS.CodePage | Defines the code page that is used within the NETx BMS Core Server. | 1 - 65535 | None | 1250 | |
| SYS.LoggingLevel | System logging level for providing additional output to server logs | -65535 - 65535 | None | 0 | |
| SYS.GeoLatitude | Specifies the geographic latitude in degrees (+ is used for north, - for south) | 0 - 360 | degrees | 0 | |
| SYS.GeoLongitude | Specifies the geographic longitude in degrees (+ is used for east, - for west) | 0 - 360 | degrees | 0 | |
| SYS.GeoElevation | Specifies the geographic elevation in meters. | 0 - 10000 | m | 0 | |
! Following SYSTEM parameters are available only for compatibility reasons and may be removed in future versions. | |||||
| SYS.GatewayConnectionTimeout | Specifies the timeout value for availability check of the connected KNXnet/IP routers. | 10 - 10000 | ms | 500 | |
| SYS.GatewayConnectionTimeoutAttemptCount | Specifies the number of call attempts for the availability check of the connection of the connected KNXnet/IP routers in the case of an interruption. | 1 - 10 | None | 3 | |
| SYS.SpinLogFile | ON - the system log file switches to a new file every day. OFF - the system log file remains in the same file as long as the server is running. | ON, OFF | None | OFF | |
Article applies to the following products:
- NETx BMS Platform
- NETx Multi Protocol Server