Multiplexer

Owned by Wolfgang Granzer
Last updated: Apr 21, 2017 by Reinhard Mayr (Unlicensed)
1 min read

This XCommand implements an 8-fold multiplexer.

Description

Depending on a pivot input the command sets the output to the value of another input or to a constant value. E.g., if the Pivot value is 1 the command writes the ConstantValue1 (if used) to the output or Input1 otherwise.

Inputs

  • Pivot (ItemID): The item that decides which Input or ConstValue should be set in the Output.
  • Input1 - 8 (ItemID, optional): ItemIDs of multiplexer inputs to be used according to the Pivotinput.

Outputs

  • Output (ItemID): The itemID that will hold the result.

Parameters

  • ConstValue1 - 8 (Any, optional): Constant values to be used according to the Pivot input. If used, the respective input is not used.

Possible trigger types

  • any

Available since:

NETx BMS Server 2.0

Â