This XCommand implements an 8-fold multiplexer.

Description

Depending on a pivot input the command sets the output to the value of another input or to a constant value. E.g., if the Pivot value is 1 the command writes the ConstantValue1 (if used) to the output or Input1 otherwise.

Inputs

Name	Type	Mandatory/Optional	Description
Pivot	ItemID	M	The item that decides which Input or ConstValue should be set in the Output.
Input1	ItemID	O	ItemIDs of multiplexer inputs to be used according to the Pivotinput.
...
Input8	ItemID	O	ItemIDs of multiplexer inputs to be used according to the Pivotinput.

Outputs

Name	Type	Mandatory/Optional	Description
Output	ItemID	M	The itemID that will hold the result.

Parameters

Name	Type	Mandatory/Optional	Description
ConstValue1	Any	O	Constant value to be used according to the Pivot input. If used, the respective input is not used.
...
ConstValue8	Any	O	Constant value to be used according to the Pivot input. If used, the respective input is not used.

Possible trigger types

Any

Article applies to the following products:

NETx BMS Platform, XLogic Library 1.0.12+
NETx Multi Protocol Server, XLogic Library 1.0.12+
NETx BMS Server 2.0

Browser not supported