EAE DA 110
- georg.kotek (Unlicensed)
- Wolfgang Granzer
- Reinhard Mayr (Unlicensed)
Owned by georg.kotek (Unlicensed)
Configuration
In addition to the common configuration options the following configuration options are available for each channel:
| parameter | type | optional/mandatory | communication object | description | default |
|---|---|---|---|---|---|
| Fault Lamp | ItemId | M | KNX Object #14, polled | True, if there is a lamp error for at least 1 DALI device. | |
| Fault Ballast | ItemId | M | KNX Object #15, polled | True, if there is a ballast error for at least 1 DALI device. | |
| Fault Converter | ItemId | O | KNX Object #16, polled | True, if there is a converter error for at least 1 DALI device. | |
| Fault Gateway Supply | ItemId | O | KNX Object #12 | True, if there is a general DALI error. | |
| Fault Mains Connected | ItemId | O | KNX Object #13 | True, if there is a mains connected supply error. | |
| Device Status | ItemId | M | KNX Object #7 | Used to trigger a normal DALI request and to get the test result. | |
| Emergency Test Start | ItemId | O | KNX Object #2 | Used to trigger an emergency DALI test. | |
| Emergency Test Interval | int | O | Specifies how long the driver will wait between sending two emergency start requests. | 10 s |