Versions Compared

Old Version 6

changes.mady.by.user Wolfgang Granzer

Saved on

compared with

New Version 7

changes.mady.by.user Wolfgang Granzer

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Table of Contents

To import the configuration of a KNX project into a management application like an OPC server, the ETS offers an export function called "Export OPC". This export functionality provides only basic information about the KNX installation.

...

Child pages (Children Display)

Changelog

Version

Date

Notes

1.0.0.9

TBD

Improvements

  • Unassigned KNX group addresses are exported as comments now

  • LaMPS Export: Support for Siemens gateways Twin plus N 141/21, plus N 141/03 and Twin N 141/31 with new firmware.

  • LaMPS Export: detected emergency lights are added to gateway device list now.

Fixes

  • Group addresses of devices with module configuration are not detected – fixed.

  • LaMPS Export: DPT mapping of Siemens KNX/DALI Gateway N 141/03, N 141/21, N 141/31 is faulty – fixed.

1.0.0.8

 

Improvements

  • LaMPS Export: Support for ABB DG/S 1.64.5.1 and ABB DG/S 2.64.5.1

  • LaMPS Export: Support for Theben DALI-Gateway KNX plus, DALI-Gateway S64 KNX and DALI-Gateway S128 KNX

  • Improved user message if no assigned group address is found.

  • Redesign of GUI selection options

  • Add project name to gateway location

1.0.0.7

 

Fixes

  • Manually added KNXnet/IP routers are not saved correctly – fixed.

Improvements

  • Added support for NETx MP Server

  • Group address assignment: normal KNX lines have a higher priority than main lines or backbone

  • Support for new Zennio KNXnet/IP routers and interfaces

  • LaMPS Export: Support for new Ipas, Schneider, Merten and MDT gateways

  • LaMPS Export: Support for Legrand gateways

  • LaMPS Export: Support for new application version of Siemens gateways

1.0.0.6

 

Improvements

  • LaMPS Export: Support for new Jung gateways

  • LaMPS Export: Support for Eelectron gateways

  • LaMPS Export: Support for HDL gateways

  • LaMPS Export: Support for B.E.G. gateways

1.0.0.5

 

New features

  • Support for Zennio IP routers and interfaces added

Fixes

  • LaMPS Export: assignment issue of KNXnet/IP routers fixed

  • Possible wrong selection for manually added KNXnet/IP routers and interfaces fixed

1.0.0.2

 

Improvements

  • LaMPS Export: Support for Siemens N141/02 added

  • Support for BMS Platform added

Fixes

  • LaMPS Export: Missing ABB DG/S x.64.1.1 DPT Mapping added

1.0.0.1

 

Fixes

  • LaMPS export: path for emergency mapping was missing

  • LaMPS export: missing DPT information for Siemens gateways

Improvements

  • LaMPS export: support for Zennio and EAE gateways added

  • LaMPS export: logging output for unused gateways added

1.0.0.0

 

New features

  • Export of Secure KNXnet/IP routers and interfaces

  • Export of KNX/DALI gateways for NETx LaMPS module