...

• datapoint polling: The NETx Server cyclically sends SNMP read requests in order to get the current value of an SNMP data point.
• traps: The NETx Server's SNMP interface receives SNMP traps sent by the SNMP device.

The driver is available for free. Each defined SNMP data point decreases the available licensed data points by one.

Installation

The SNMP driver is provided as an extension and is not included within the default setup.

To install the SNMP driver, open the Core Studio and shutdown the Core Server. Afterwards, start the Extension Manager via the menu Extensions > Manager > Start Extension Manager ....

Within the dialog, select "SNMP" and press the Install button. After having installed the SNMP driver, close the BMS studio and reopen it. Within the menu of the Core Studio you will find a new menu, SNMP. It contains items for all definitions that are necessary for configuration the SNMP driver.

Configuration

• General configuration
  • Server configuration
  • Client configuration
  • Listener definitions
  • User definitions
• Server-side configuration
  • Mapping definitions
  • Server trap definitions
• Client-side configuration
  • Device definitions
  • Data point definitions
  • Client trap definitions

...

...