To import the configuration of a KNX project into a management application like an OPC server, the ETS offers an export function called "Export OPC". This export functionality provides only basic information about the KNX installation.
...
Changelog
Version
Date
Notes
1.0.0.11
Improvement
LaMPS Export: Support for ABB DG/Sx.64.5.1 app version 2.0.
Support for Hager router TH210
Fixes
NETx BMS Server 2.0 export broken – fixed.
1.0.0.10
New features
LaMPS Export: switching, brightness and operating hours counter objects can be exported for Insta DALI gateway and its variantsnow.
Improvement
Use line prior to main line and backbone for group address assignment
Fixes
LaMPS Export: possible wrong data type export for Siemens gateways – fixed.
LaMPS Export: possible wrong data type export for IPAS DALI gateway and its variants – fixed.
Option " "Export multiple group addresses" was broken – fixed.
1.0.0.9
Improvements
Unassigned KNX group addresses are exported as comments now
LaMPS Export: Support for Siemens gateways Twin plus N 141/21, plus N 141/03 and Twin N 141/31 with new firmware.
LaMPS Export: detected emergency lights are added to gateway device list now.
Fixes
Group addresses of devices with module configuration are not detected – fixed.
LaMPS Export: DPT mapping of Siemens KNX/DALI Gateway N 141/03, N 141/21, N 141/31 is faulty – fixed.
1.0.0.8
Improvements
LaMPS Export: Support for ABB DG/S 1.64.5.1 and ABB DG/S 2.64.5.1
LaMPS Export: Support for Theben DALI-Gateway KNX plus, DALI-Gateway S64 KNX and DALI-Gateway S128 KNX
Improved user message if no assigned group address is found.
Redesign of GUI selection options
Add project name to gateway location
1.0.0.7
Fixes
Manually added KNXnet/IP routers are not saved correctly – fixed.
Improvements
Added support for NETx MP Server
Group address assignment: normal KNX lines have a higher priority than main lines or backbone
Support for new Zennio KNXnet/IP routers and interfaces
LaMPS Export: Support for new Ipas, Schneider, Merten and MDT gateways
LaMPS Export: Support for Legrand gateways
LaMPS Export: Support for new application version of Siemens gateways
1.0.0.6
Improvements
LaMPS Export: Support for new Jung gateways
LaMPS Export: Support for Eelectron gateways
LaMPS Export: Support for HDL gateways
LaMPS Export: Support for B.E.G. gateways
1.0.0.5
New features
Support for Zennio IP routers and interfaces added
Fixes
LaMPS Export: assignment issue of KNXnet/IP routers fixed
Possible wrong selection for manually added KNXnet/IP routers and interfaces fixed