...
Parameter | UDP.ReceiveBroadcastTelegrams |
|---|---|
Description | It specifies whether KNX telegrams from the "BROADCAST" gateway are accepted by the server. ON - "BROADCAST" telegrams are accepted OFF - "BROADCAST" telegrams are dropped |
Scope | ON, OFF |
Unit | None |
Default value | ON |
| Info |
|---|
| ! If a KNX group address is only assigned to the "BROADCAST" router, all telegrams that use this KNX groups address are interpreted as "BROADCAST" telegrams – even if they are received from a KNXnet/IP router that is defined within the server. If the KNX group address is assigned to another router (e.g. "192.168.1.2") and a telegram with this KNX address is received from this router, the telegram will be interpreted as "192.168.1.2" telegram. |
Parameter | UDP.SendBroadcastAsMultipleUnicast |
|---|---|
Description | It defines whether the "BROADCAST" telegrams are sent as IP broadcast packets or as multiple unicast packets to each single router. |
Scope | ON, OFF |
Unit | None |
Default value | OFF |
...