Location:
TODO:
KNX.PhysicalDeviceRetryCount
is das absichtlich rausgefallen?
reinhard [10:41 AM]
checking....
wgranzer [10:42 AM]
der parameter is im Jänner 2017 im BMS 2 hinzugekommen. kann sein dass das HCF damals nicht im BMS 4 aktualisiert wurde
Location: <WorkspaceDirectory>\ConfigFiles\nxaOPCRouter.35.cfg
The following parameters are only relevant for KNXnet/IP devices:
Parameter | NETIP.NetworkCardIPAddress |
|---|---|
Description | The IP address of the local network interface used for KNX communication. If left empty, the BMS Server attempts to determine a suitable network interface based on local IP addresses and network masks combined with the interface's IP address. If the BMS Server is unable to find a suitable interface, an error message is raised. |
Scope | IP address |
Unit | None |
Default value | IP address of the network interface for KNX communication. |
...