...
The following parameters are only relevant for KNXnet/IP devices:
| Parameter | Description | Scope | Unit | Default value |
|---|
| NETIP.NetworkCardIPAddress |
Description | The IP address of the local network interface used for KNX communication. If left empty, the BMS Server attempts to determine a suitable network interface based on local IP addresses and network masks combined with the interface's IP address. If the BMS Server is unable to find a suitable interface, an error message is raised |
.ScopeUnit | Default value | | The IP address of the network interface for KNX communication. |
ParameterDescription | This parameter specifies whether the KNXnet/IP device is behind a NAT router or firewall. |
- - : the NAT flag within the KNXnet/IP tunneling protocol is set.
- OFF
|
- - : the NAT flag is not set.
|
Scope | Unit | None |
Default value | OFF| NETIP_ROUTING.NetworkCardIPAddress | The IP address of the network card used for KNXnet/IP routing. | IP address | None |
|