...
Fault information is provided by the following Server Items which are located directly under the gateway branch within the Server Item Tree:
| item name | description |
|---|
| KNX IP Connection | This Item reflects the KNXnet/IP tunneling connection to KNXnet/IP router or interface which is used to communicate with the KNX/DALI gateway. |
| Fault | True, if there is either a power failure, short circuit, presence, ballast or lamp fault. |
| Fault |
Power Failure| Devices | True, if there is a |
power failure within the DALI gateway| lamp or ballast failure for at least 1 DALI device. |
| Fault |
Short Circuit| Ballast | True, if there is a |
general short circuit | ballast fault of one or more DALI devices on the |
DALI Presence at least one DALI device is missing | there is a lamp fault of one or more DALI devices on the channel. |
| Fault |
Device| Power Failure | True, if there is a |
lamp or ballast failure for at least 1 DALI device| power failure within the DALI gateway. |
| Fault |
Ballast| Short Circuit | True, if there is a |
ballast fault of one or more DALI devices | general short circuit on the DALI channel. |
Lamp there is a lamp fault of one or more DALI devices | at least one DALI device is missing on the channel. |
| Include Page |
|---|
| Normal DALI testing server items |
|---|
| Normal DALI testing server items |
|---|
|
...
For each configured DALI device, a sub tree with the name "Device<number>" is shown within the Server Item Tree. Each device has the following Server Items:
| item name | description |
|---|
| Name | Human-readable name of the DALI device. The default name is "Device<number>". This name can be changed within the Device Name Mapping Definitions. |
| Fault | True, if either a lamp or a ballast fault occurred. |
| Fault Lamp | True, if there is a lamp fault. |
| Fault Ballast | True, if there is a ballast fault. |
| Test |
Succeeded| succeeded | True, if a response is received during the test. |
