Zennio
- georg.kotek (Unlicensed)
- Wolfgang Granzer
- Reinhard Mayr (Unlicensed)
Supported gateways
Name | Order number | Application |
|---|---|---|
DALIBOX Interface 64/32 | ZDI-DLI | DALIBOX Interface 64/32 1.3 |
DALIBOX Broadcast 6CH | ZDI-DLB6 | DALIBOX Broadcast 6CH 1.2 |
DALIBOX Broadcast 4CH | ZDI-DLB4 | DALIBOX Broadcast 4CH 1.2 |
DALI BOX Interface 64 v3 | ZDID64V3 | DALI BOX Interface 64 v3 2.1 |
DALI BOX Interface 64 X2 | ZDID64X2 | DALI BOX Interface 64 X2 2.1 |
inBOX DALI 16 | ZDIIBD16 | inBOX DALI 16 2.2 |
DALI BOX Broadcast 4CH v2 | ZDIDLB4V2 | DALI BOX Broadcast 4CH v2 2.3 |
DALI BOX Broadcast 6CH v2 | ZDIDLB6V2 | DALI BOX Broadcast 6CH v2 2.3 |
Configuration
In addition to the common configuration options the following configuration options are available for each channel:
Parameter | Type | Optional/Mandatory | Description | Default |
|---|---|---|---|---|
Fault Power Failure | ItemId | O | True, if there is a power failure at the DALI gateway. |
|
Fault Short Circuit | ItemId | O | True, if there is a short circuit at the DALI bus. |
|
Fault Presence | ItemId | O | True, if at least one DALI device is missing. |
|
Error Status | ItemId | M | Used to request and retrieve the error status of a DALI device. |
|
Name | Emergency | Fault Power | Fault Short Circuit | Fault Presence | Fault Ballast | Fault Lamp | Error Status | Em.Start | Em.Result | Em.Off. |
|---|---|---|---|---|---|---|---|---|---|---|
DALIBOX Interface 64/32 | No | #8 | #9 | #10 | NA | NA | #11 | NA | NA | NA |
DALI BOX Interface 64 v3 | Yes | #4 | #13 | #14 | #15 | #16 | #18 | #41 | #43 | 9 |
DALI BOX Interface 64 X2 | Yes | #4 | #13 | #14 | #15 | #16 | #18 | #41 | #43 | 9 |
inBOX DALI 16 | Yes | -- | #13 | #14 | #15 | #16 | #18 | #41 | #43 | 9 |
DALI BOX Broadcast 4CH v2 | No | #4 | #16 | #17 | #18 | #19 | #22 | NA | NA | NA |
DALI BOX Broadcast 6CH v2 | No | #4 | #16 | #17 | #18 | #19 | #22 | NA | NA | NA |
Functional description
The Zennio DALIBOX Interface 64-32 supports one DALI channel with up to 64 DALI devices.
Fault information is provided by the following Server Items which are located directly under the gateway branch within the Server Item Tree:
item name | description |
|---|---|
KNX IP Connection | This Item reflects the KNXnet/IP tunneling connection to KNXnet/IP router or interface which is used to communicate with the KNX/DALI gateway. |
Fault | True, if there is either a power failure, short circuit, presence, ballast or lamp fault. |
Fault Devices | True, if there is a lamp or ballast failure for at least 1 DALI device. |
Fault Ballast | True, if there is a ballast fault of one or more DALI devices on the channel. |
Fault Lamp | True, if there is a lamp fault of one or more DALI devices on the channel. |
Fault Power Failure | True, if there is a power failure within the DALI gateway. |
Fault Short Circuit | True, if there is a general short circuit on the DALI channel. |
Fault Presence | True, if at least one DALI device is missing on the channel. |
For each configured DALI device, a sub tree with the name "Device<number>" is shown within the Server Item Tree. Each device has the following Server Items:
item name | description |
|---|---|
Name | Human-readable name of the DALI device. The default name is "Device<number>". This name can be changed within the Device Name Mapping Definitions. |
Fault | True, if either a lamp or a ballast fault occurred. |
Fault Lamp | True, if there is a lamp fault. |
Fault Ballast | True, if there is a ballast fault. |
Test succeeded | True, if a response is received during the test. |