...
In addition to the common configuration options the following configuration options are available for each channel:
| parameter | type | optional/mandatory | communication object | description | default |
|---|
| Fault Power Failure | ItemId | O | KNX Object #8 | True, if there is a power failure at the DALI gateway. |
|
| Fault Short Circuit | ItemId | O | KNX Object #9 | True, if there is a short circuit at the DALI bus. |
|
| Fault Presence | ItemId | O | KNX Object #10 | True, if at least one DALI device is missing. |
|
| Error Status | ItemId | M | KNX Object #11 | Used to request and retrieve the error status of a DALI device. |
|
| Anchor |
|---|
| EmergencyTestMapping |
|---|
| EmergencyTestMapping |
|---|
|
Functional description
The Zennio DALIBOX Interface 64-32 supports one DALI channel with up to 64 DALI devices.
Fault information is provided by the following Server Items which are located directly under the gateway branch within the Server Item Tree:
| item name | description |
|---|
| KNX IP Connection | This Item reflects the KNXnet/IP tunneling connection to KNXnet/IP router or interface which is used to communicate with the KNX/DALI gateway. |
| Fault | True, if there is either a power failure, short circuit, presence, ballast or lamp fault. |
| Fault Devices | True, if there is a lamp or ballast failure for at least 1 DALI device. |
| Fault Ballast | True, if there is a ballast fault of one or more DALI devices on the channel. |
| Fault Lamp | True, if there is a lamp fault of one or more DALI devices on the channel. |
| Fault Power Failure | True, if there is a power failure within the DALI gateway. |
| Fault Short Circuit | True, if there is a general short circuit on the DALI channel. |
| Fault Presence | True, if at least one DALI device is missing on the channel. |
| Include Page |
|---|
| Normal DALI testing server items per DALI gateway |
|---|
| Normal DALI testing server items per DALI gateway |
|---|
|
For each configured DALI device, a sub tree with the name "Device<number>" is shown within the Server Item Tree. Each device has the following Server Items:
| item name | description |
|---|
| Name | Human-readable name of the DALI device. The default name is "Device<number>". This name can be changed within the Device Name Mapping Definitions. |
| Fault | True, if either a lamp or a ballast fault occurred. |
| Fault Lamp | True, if there is a lamp fault. |
| Fault Ballast | True, if there is a ballast fault. |
| Test succeeded | True, if a response is received during the test. |