Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Fault information is provided by the following Server Items which are located directly under the gateway branch within the Server Item Tree:

item namedescription
KNX IP ConnectionThis Item reflects the KNXnet/IP tunneling connection to KNXnet/IP router or interface which is used to communicate with the KNX/DALI gateway.
FaultTrue, if there is either a power failure, short circuit, presence, ballast or lamp fault.
Fault
Power Failure
DevicesTrue, if there is a
power failure within the DALI gateway.Fault Short CircuitTrue, if there is a general short circuit on the DALI channel.Fault PresenceTrue, if at least one DALI device is missing on the channel.Fault DeviceTrue, if there is a
lamp or ballast failure for at least 1 DALI device.
Fault BallastTrue, if there is a ballast fault of one or more DALI devices on the channel. 
Fault LampTrue, if there is a lamp fault of one or more DALI devices on the channel. 

 For DALI testing, the following Server Items are available:

...

Fault Power FailureTrue, if there is a power failure within the DALI gateway.
Fault Short CircuitTrue, if there is a general short circuit on the DALI channel.
Fault PresenceTrue, if at least one DALI device is missing on the channel.

Include Page
Normal DALI testing server items per DALI gateway
Normal DALI testing server items per DALI gateway

For each configured DALI device, a sub tree with the name "Device<number>" is shown within the Server Item Tree. Each device has the following Server Items:

item namedescription
NameHuman-readable name of the DALI device. The default name is "Device<number>". This name can be changed within the Device Name Mapping Definitions. 
FaultTrue, if either a lamp or a ballast fault occurred.
Fault LampTrue, if there is a lamp fault.
Fault BallastTrue, if there is a ballast fault.
Test
Succeeded
succeededTrue, if a response is received during the test.

...