Location:
<WorkspaceDirectory>\DataFiles\nxaGatewayDefinitions.3540.dat
The gateway manager maintains the connections to the KNXnet/IP devices which are connected to the KNX system. The gateway definition table defines all the KNXnet/IP interfaces and routers that are used within the project.
| Info |
|---|
| ! No telegrams are sent to the offline gateways. |
| Info |
|---|
! This definition file can also be generated using the ETS app import wizard (Studio → KNX → Inport NETx ETS App file ...) which generates the KNX gateway definitions from an exported ETS project. |
The structure of the gateway definition file is as follows:'Syntax of the Gateway Definition Table:
'IP Address;Type;Port;Name;Locality;Description ;Options'
192.168.1.1;IGS;51000; GATE 1;Room 51;pre-defined Gateway 1
192.168.1.2;NETIP;3671;Gate2;;;;;;;
192.168.1.3;EIBNODE;1634;Gate3;;;;;;;
Each line – except comment lines that start with ' – defines a single KNXnet/IP gateway.
| Info |
|---|
! The virtual "BROADCAST" gateway is added by the system and must not be defined in the table. |
...
| | This attribute specifies | Specifies the IP address of the KNXnet/IP gateway. |
The IP address is also used to uniquely identify the gateway within the server. Therefore, it must be unique within the whole network. | IP address | None |
|
| 2 | Gateway Type |
| The type of the KNXnet/IP gateway. |
"IGS" refers to ABB IG/S, EIBNODE to b.a.b - technologie eibnode, and NETIP to all other KNXnet/IP routers and interfaces.3 | UDP Port | | This attributes represents the UDP It is used to give the gateway a Supported types are - SEC_NETIP: secure KNXnet/IP tunnelling
- NETIP: native KNXnet/IP tunnelling
- NETIP_ROUTING: native KNXnet/IP routing
| SEC_NETIP, NETIP, NETIP_ROUTING | None |
|
| 3 | Port | The UDP or TCP port number which is used to connect to the gateway. | UDP or TCP port number | None |
|
| 4 | Name |
| | A unique human-readable name |
(can be any user-defined string)| . | String | None | The gateway's IP address. |
| 5 | Locality |
| This attribute can be used to specify the location of the gateway (can be any user-defined string). | String | None |
|
| 6 | Description |
| | This attribute can be used to specify a human-readable text that further describes the gateway (can be any user-defined string). | String | None |
|
| 7 |
Options | | If the gateway is of type "EIBNODE", the SenderNetID has to be specified here. | | 8 - 11 | Path, Extended Data 1 - 3 | | These columns are for internal use only. |
| Source phys. KNX Address | The physical KNX address used by the Core Server when sending telegrams. Only used for KNXnet/IP routing. | KNX phys. address | None |
|
| 8 | Network Card IP Address | The local network card IP address used by the Core Server. Only used for KNXnet/IP routing. | IP address | None |
|
| 9 | Management Code | The management code used for authentication to a secure KNXnet/IP tunnelling device. This must be identical to the code used within the ETS. | String | None |
|
| 10 | Authentication Code | The authentication code used for authentication to a secure KNXnet/IP tunnelling device. This must be identical to the code used within the ETS. | String | None |
|