Emergency test mapping definitions

Some gateways do not have a global KNX communication object for starting an emergency test and for getting the result – they have a separate object for each device. Therefore, the ItemIDs has to be configured for each emergency lighting separately.

This is done in the Emergency Test Mapping Defintions Table:

parameter

type

optional/mandatory

description

default

Name

string

M

Name of the Dali gateway that is used within the gateway definition.

Path

string

O

Path of the Dali gateway that is used within the gateway definition.

not used

DeviceId

number

M

The DALI number of the device (starting with 1).

Start Test

ItemId

M

Item that is used to start an emergency test.

gateway types	description
Gira/Insta DALI Gateway Plus REG 218000, Hager Dali gateway KNX TYA670D, Jung KNX DALI-Gateway Plus 2098 REGHE	KNX Object #433 + (device ID -1) * 17 (i.e. #433, #450, #467, ...)
Ipas DaliControl e64, MDT DaliControl IP Gateway SCN-DALI64.02, Merten KNX DALI-Gateway REG-K/1/16(64)/64/IP1 (MEG6725-0001), Schneider KNX DALI-Gateway MTN6725-0001	KNX Object #176 + (device ID -1) * 11 (i.e. #176, #187, ...)
Siemens KNX/DALI Gateway N 141/03, N 141/21, N 141/31	Channel A: KNX Object #607 + (device ID -1) * 2 (i.e. #607, #609, ...) Channel B: KNX Object #1306 + (device ID -1) * 2 (i.e. #1306, #1308, ...)

Test Result

ItemId

M

Item that provides the test result. Dependening on the gateway type, the following KNX communication objects have to be used:

gateway types	description
Gira/Insta DALI Gateway Plus REG 218000, Hager Dali gateway KNX TYA670D, Jung KNX DALI-Gateway Plus 2098 REGHE	KNX Object #432 + (device ID -1) * 17 (i.e. #432, #449, #466, ...)
Ipas DaliControl e64, MDT DaliControl IP Gateway SCN-DALI64.02, Merten KNX DALI-Gateway REG-K/1/16(64)/64/IP1 (MEG6725-0001), Schneider KNX DALI-Gateway MTN6725-0001	KNX Object #177 + (device ID -1) * 11 (i.e. #177, #188, ...)
Siemens KNX/DALI Gateway N 141/03, N 141/21, N 141/31	Channel A: KNX Object #608 + (device ID -1) * 2 (i.e. #608, #610, ...) Channel B: KNX Object #1307+ (device ID -1) * 2 (i.e. #1307, #1309, ...)