The SNMP mapping definitions specify the server item that shall be mapped to SNMP data points. Data changes of server items can be sent as SNMP traps
File location
<WorkspaceDirectory>\DataFiles\xio.SNMP.ServerTrapDefinitions.dat
| Col# | Parameter | Description | Scope | Unit | Mandatory / default value |
|---|---|---|---|---|---|
| 1 | Destination IP | IP address to which the traps shall be sent. | IP address | none | mandatory |
| 2 | Port | Port to which the traps shall be sent. | 1 – 65535 | none | 162 |
| 3 | Enterprise OID | The OID that shall be sent in the trap as enterprise OID. | OID | none | mandatory |
| 4 | Variables OID | List of variable OIDs that shall be sent in the traps. At least 1 OID must be specified. Multiple OIDs are separated by comma , (e.g. <OID1>,<OID2>, ...) | List of OIDs | none | mandatory |
| 5 | Generic code | Generic code there is sent for V1 traps. For V2 and V3 traps, this code is ignored. | ColdStart, WarmStart, LinkDown, LinkUp, AuthenticationFailure, EgpNeighborLoss, EnterpriseSpecific | none | ColdStart |
| 6 | Specific code | Specific code that is sent for V1 traps. For V2 and V3 traps, this code is ignored. | int | none | 0 |