/
KNX interface disconnected
KNX interface disconnected
- Reinhard Mayr (Unlicensed)
Owned by Reinhard Mayr (Unlicensed)
Oct 16, 2017
Analytics
Loading data...
| Error Message | KNX interface disconnected |
|---|---|
| Related Products | Voyager 5.0 Direct(KNX) |
| Description | The falcon driver has lost the connection to the KNX bus. |
| Causes | Check prior INFO logs: (1) Falcon status (type: 4, value: 1) – the lifetime connection is broken |
| Resolutions | (1) If the device had been connected previously, check your firewall settings for the rule named NETx Falcon. Make sure your network location matches the allowed locations of the rule. |
, multiple selections available,
Related content
Falcon driver not found
Falcon driver not found
More like this
WARNING - Processor / Virtual device error code: 2
WARNING - Processor / Virtual device error code: 2
More like this
KNXnet/IP devices occasionally go offline
KNXnet/IP devices occasionally go offline
More like this
How to check the connection to a KNXnet/IP router or interface
How to check the connection to a KNXnet/IP router or interface
More like this
KNX device definitions.
KNX device definitions.
More like this
Voyager1: Creating a visualization for KNX
Voyager1: Creating a visualization for KNX
More like this