KNX.SetScene

Owned by Reinhard Mayr (Unlicensed)
Last updated: May 13, 2020 by Wolfgang Granzer
1 min read

This XLogic command can be used to set predefined values of KNX scene that is implemented by KNX.Scene.

Description

By specifying the scene number, number as well as ItemIDs and values, values for a KNX scene can be predefined. This functionality is similar to specify scene values via ETS parameters.

Inputs

  • Trigger (ItemID, optional): If used, this Server Item can be used to trigger the setting of the values. 

Outputs

  • Scene_Datapoint1 (ItemID): Item ID of scene member 1.
  • Scene_Datapoint2 (ItemID, optional): Item ID of scene member 2.
  • ...
  • Scene_Datapoint8 (ItemID, optional): Item ID of scene member 3.

Parameters

  • Scene_Name (String): this name is used to identify the scene. 
  • Scene_Number (Number): this parameter specifies the scene number for which the values shall be stored.
  • Datapoint1_Value (Any): value for scene member 1.
  • Datapoint2_Value (Any, optional): value for scene member 2.
  • ...
  • Datapoint8_Value (Any, optional): value for scene member 8.


Applies to

  • NETx BMS Platform, XLogic Library 1.0.12+
  • NETx Multi Protocol Server, XLogic Library 1.0.12+