/
OPC Client callback function failed
OPC Client callback function failed
- Reinhard Mayr (Unlicensed)
Owned by Reinhard Mayr (Unlicensed)
May 18, 2017
| Error Message | OPC Client callback function failed |
|---|---|
| Related Products | BMS Server 2.0 |
| Description | An OPC client callback function failed. |
| Causes | An OPC client was registered for server items but it could be notified about changes. This can happen if the OPC client did not terminate the connection before stopping. |
| Resolutions | If the OPC client in question is NETx Voyager, then Voyager should be configured to use VNET communication with the BMS Server. |
, multiple selections available,
Related content
CLUSTER_OPC_DA_SERVER; E1299: Server '<server-name>' connection failed.
CLUSTER_OPC_DA_SERVER; E1299: Server '<server-name>' connection failed.
More like this
NETIP_TUNNELING_SOCKET; No valid Server IP Address can be detect.Set 'NetworkCardIPAddress' Parameter in Router Configuration file.
NETIP_TUNNELING_SOCKET; No valid Server IP Address can be detect.Set 'NetworkCardIPAddress' Parameter in Router Configuration file.
More like this
The BMS Client Editor does not start
The BMS Client Editor does not start
More like this
VNET_SERVER: Listing Socket E03. Server could not be initialized (E5177)
VNET_SERVER: Listing Socket E03. Server could not be initialized (E5177)
More like this
Configuration dialog cannot be opened. Use server with historical database.
Configuration dialog cannot be opened. Use server with historical database.
More like this
The NETx BMS could not be started! Check the server Log files or Windows Event List for more information.
The NETx BMS could not be started! Check the server Log files or Windows Event List for more information.
More like this