Math.Multiplexer
- Reinhard Mayr (Unlicensed)
- Wolfgang Granzer
Owned by Reinhard Mayr (Unlicensed)
This XCommand implements an 8-fold multiplexer.
Description
Depending on a pivot input the command sets the output to the value of another input or to a constant value. E.g., if the Pivot value is 1 the command writes the ConstantValue1 (if used) to the output or Input1 otherwise.
Inputs
Name | Type | Mandatory/Optional | Description |
|---|---|---|---|
| Pivot | ItemID | M | The item that decides which Input or ConstValue should be set in the Output. |
| Input1 | ItemID | O | ItemIDs of multiplexer inputs to be used according to the Pivotinput. |
| ... | |||
| Input8 | ItemID | O | ItemIDs of multiplexer inputs to be used according to the Pivotinput. |
Outputs
Name | Type | Mandatory/Optional | Description |
|---|---|---|---|
| Output | ItemID | M | The itemID that will hold the result. |
Parameters
Name | Type | Mandatory/Optional | Description |
|---|---|---|---|
| ConstValue1 | Any | O | Constant value to be used according to the Pivot input. If used, the respective input is not used. |
| ... | |||
| ConstValue8 | Any | O | Constant value to be used according to the Pivot input. If used, the respective input is not used. |
Possible trigger types
Any
Article applies to the following products:
- NETx BMS Platform, XLogic Library 1.0.12+
- NETx Multi Protocol Server, XLogic Library 1.0.12+
- NETx BMS Server 2.0