HDL configuration

Owned by Andreas Bernegger (Unlicensed)
Last updated: Feb 03, 2022 by Reinhard Mayr (Unlicensed)
1 min read

Within this configuration file, general HDL Buspro settings are configured.

File location

<WorkspaceDirectory>\ConfigFiles\xio.Hdl.cfg

Example
xio.hdl.SenderIp:192.168.1.10
xio.hdl.SenderPort:6000


ParameterDescriptionScopeDefault value
SenderIp

IP address of the NETx Server's network interface card used to connect to the HDL Buspro interface.

If empty, the server listens on all interfaces and sends on the interface with a matching route to the target IP adress.

IP addressempty
SenderPortLocal UDP port used to communicate with the HDL Buspro interface. The BMS server is listening on this port.
Default port is 6000		port number6000