Create and configure a NETx Vision profile

Once the NETx Vision App is installed and started, the Profiles page will appear. Click the Add button in the upper right corner to open the New Profile page.

Parameter	Description
General
Name	Configuration name. Must be unique.
Basic Authentication	Enable if Basic Authentication is required for external websites.
Main Server
Host	IP address or host name of the main server
Port	TCP port of the web server as configured in Web Manager's config.xml, key HTTP or HTTPS depending on the TLS setting below
TLS	enable to use HTTPS instead HTTP
Timeout (s)	connection timeout in seconds
Login Timeout (s)	login timeout in seconds
Visualization
Username	Username as configured in the Web Manager user management
Password	Password of the user above
Device	The name of the visualization device as configured in the Web Manager. Tap the Get available devices button to search the web server for known visualization devices using the provided connection details.
Main/Backup
Enabled	Enable to use a backup server. Tap the Auto config backup server button to obtain the backup server configuration from the already configured main server.
Backup server (only if Main/Backup enabled)
Host	IP address or host name of the main server
Port	TCP port of the web server as configured in Web Manager's config.xml, key HTTP or HTTPS depending on the TLS setting below
Timeout (s)	connection timeout in seconds
Login Timeout (s)	login timeout in seconds
TLS	enable to use HTTPS instead HTTP

Make sure that the mobile device is able to connect to the NETx server (host and TCP port).

In most cases the mobile device will use a WiFi connection which has to be configured before using the NETx Vision App.

If the mobile device is equipped with a SIM card, it can connect to the NETx server via mobile data connection or via WiFi.